An autopay discount fee for not using autopay is the standard in US cellular.

Would you be willing to share your scripts?

What kind of car is it? Do you have any better pictures of inside the wheel well, or know how it’s supposed to be attached? You might be able to take out some of the trim clips for the fender liner and pull the fender off and find that you can just slip it back into a groove or something. If you need to glue it, epoxy would work fine, or a silicone would work well too.

I have melted and cast ingots from thousands of dirty aluminum cans. Rinsing first is ideal of course, but all the crap floats to the top of the molten metal as slag and you can scoop it off to discard.

Is he not allowed to have the same opinion?

You don’t even have to round, it’s been a full decade.

I work in Walmarts, and all of my stores have recently(over the last few months) rolled out the e-ink electronic price tags. I wouldn’t be surprised if the tariff drama is the reason they decided to pull the trigger to save a bunch of price-change labor.

How do you think this was cut? It doesn’t seem like there’s any melting, so maybe a water jet?

So far I’ve just been using the basic obd2 Bluetooth things but the apps available are very limited. I’ve been able to do some custom PIDs for some of my vehicles, and others you can often find tools that allow you to do some specific programming but it lacks a lot. I’ve been considering some of the ones you can find for around $400 from China but I’m not sure if those are anywhere near the same level as the 10k snap on ones.

I just wanna say I love your comment and the KOTH references.

I have never actually tried printing off the device itself, the touch screen is very confusing. I always submit print jobs over the network via OrcaSlicer. But yes, that is exactly the kind of thing I meant when I said it has some odd quirks.

Weirdness: The default g-code for the machine does silly things like park the nozzle over the build plate letting it ooze, instead of over the nozzle wiper/waste container.

The filament change routine is strange, requiring you to remove the bowden tube to cut the filament every time. This is easily fixed by printing a filament cutter and using that to cut the filament.

The bowden tube rubs against the top plexiglass lid for the machine, requiring you to print a riser for the lid to avoid it getting all scratched up.

The door for the machine is an odd shape design with no handle making it a little annoying to get a grip to open it.

The filament holder they include is a very bad design, flexes heavily with a full roll of filament and I have had spools fall off several times while printing.

The touch screen menu isn’t very intuitive and it can be very laggy at times.

Good features for the price point: Fully enclosed with built in chamber heater.

Pretty decent auto leveling system.

Timelapse camera.

Runs klipper/mainsail and input shaping is pretty cool.

I have around 500 hours on mine and I haven’t had any prints fail that were the fault of the machine so I’m pretty impressed by that. And I find the features and capabilities to be pretty great for the price point. They just could use to do some polishing of the design

I have a Qidi Q1 Pro and I’m pretty happy with it. Very fast precise prints and pretty reliable. There’s definitely some strange design decisions and weird quirks to it and Bambu machines feel way more polished. Overall I’d definitely recommend the Qidi machines but they are not quite as simple for people with no 3d printing experience. They are very feature rich and amazing printers for the price.

I’ve been listening to the “Destiny’s Crucible” series by Olan Thorensen. Currently on the 8th book “A Fearful Symmetry”.

It’s about a guy from earth that has been transported, by aliens, to another planet that happens to also have humans but their culture is at a much lower technology level(around what earth was in the 1600s). And it follows him as he adjusts to the culture, and carefully starts introducing innovations.

Whats a reputable source to compare ratings/reviews for these machines? Do you have any personal recommendations?

Well… I’m sure their point was, that services such as that shouldn’t at all be needed to understand what you’re agreeing to. But thank you for sharing!

That was fantastically relevant and awesome. Thank you.

Fair enough, I guess I just end up needing to fix things for other people way more than the average person. And more often then not, a multi tool saves me a trip to my car tool box. Its mainly just the blade, and pliers that get a lot of use. But the scissors and file get used quite a bit, too.

I’m almost curious what kind of life you live? You never find yourself in a situation where having a knife, screwdriver, pliers, or a flashlight on you wouldn’t be a huge convenience?

Are you being sarcastic? $400 for 55in TV is high end… Lower cost 55in are, on average, $240. Affordable TV for most of the world would be under $200-$250