I believe it might be one of the fundamental truths of the Buddha… You never have the correct number or types of clamps. Yet always have seemingly too many clamps to justify buying more.

Immediately thought “salad”

Nah, in Tommy, Elton John sung it.

From Wikipedia, “The song was performed by British musician Elton John in Ken Russell’s 1975 film adaptation of Tommy”

I watched it semi recently, so it was fresh -ish in my mind.

I’m curious f anyone here has seen the movie “Tommy” this is a song from the movie. Sung by Elton John.

You see it first they’ll do it with carefully chosen surfaces…

Then I’ll just let AI do it randomly, Before long an incredibly emotional scene we’ll get a tasteless ad.

Who wants to be watching a dog get put down in Marley and me, only to be taken out of it when you see an advert on the back wall for… Idk… Trojan condoms?

I wonder if you could create a partition as you would.with a hard disk or SSD.

A not totally unrelated stack post:

stack post

I’ve lost soooo many hours to this!

In my youth, the falling sand game really spoke to me, I spent ages adding my own elements, and it even got me interested in coding as a result.

The powder toy was such a revelation. Still regularly play.

A almost instantaneous blend of “pwaaar that’s soooo fucking hot, oh wait, no it’s a pumpkin, oh wait is it AI?” Then … ugh, unzips

Which is also interesting coz I’m not wearing anything with a zip!

Literally my first thought.

Well, not my FIRST thought, but you get it.

Personally yes, absolutely. I guess benefits of being Bi/Pan?

But I can see how some wouldn’t. Preference and compatibility matters in a relationship.

I immediately thought Edith finch

Obligatory technology connections video:

https://youtu.be/TBPVJtGBf8Y

I might have got lucky. but I also had every chance to succeed between the surface prep and the slow inital layers.

But a lessons learn definitely apply to all types of printing. I’ve done a couple of pla prints since… and they are perfect.

Truthfully it was so long ago I can’t even recall why I got the PETG to begin with.

For my purposes PLA has always worked fine. The only other filament I’ve really been interested in is tpu, but I think I want to end up getting something dedicated for that type of work… If I convince myself it’s worth it.

Also, good shout on the wipes!

Yeah as soon as I realized I was enjoying myself, I ordered a few roles of different materials. I’ll give them a try when they land.

Dish soap is my usual go to!

it has been a while since I’ve printed, but now you mention it yes I seem to recall never having good luck with pla+

😂 I know what to sing a theme with the responses. For the size of machine and enclosure is difficult. But it is positioned in a place I should be able to fashion something.

As I’ve mentioned with other comments I will try each of these things.

Have you had much luck with hairspray?

I do usually give it a quick scrub, maybe not the best technique… But I blightly scrub the surface with a sponge… admittedly using some mild soap and water, then wiping it down with plain water. And finally drying with paper towel. I also make sure the bed preheats beforehand to drive off any remaining moisture.

As other comments of suggested I will try using some IPA 99. If it continues this way I likely use some glue as well.

Thanks for the advice.

The heated bed was set to 70, however I’ve realised it’s actually only for the initial layer where it drops to 60.

Do you think I should try to consistent 60 or 70?

I do have an IR thermometer so I will give it a thorough probe…

As for an enclosure… This is something I remember planning when I initially got the machine years ago. Unfortunately one of the big selling points of the any cubic chiron was the enormous build plate! This means building of an enclosure for it eats up quite a bit of space 😂 It’s currently situated underneath a desk with three of the four sides covered, but I shall make a curtain to cover the front.

N.b. I can’t ever recall using any significant amount of the enormous build plate… So when I look to buy a new printer, I’ll definitely go with something a lot smaller, with an enclosure.

Thank you very much for your response, and the link.

I had a look at my settings for bed temperature. I currently have the bed temperature at 70 degrees. However it appears that is initial bed temperature. It then drops to 60. Thankfully I want to print a few more of the exact same model, so I will reprint on a steady 70.

I will give the bed to thorough clean with 99% IPA. A next perhaps a coating of PVA.

Thx again!