What do you do with the fountain pens? Write/journal? Or do you more enjoy inking them etc?

neofetch

Mass Effect is one of my favourite game franchises of all time (the trilogy - I never really got into Andromeda) and can definitely be played on a casual basis.

What software is the dashboard in? I’ve seen similar ones here before but not sure what people are using to see it all at a glance like that.

People have made the same recommendations here already but I’ll throw my opinion in: the two I always recommend are the Ender (V2 or S1) and the Prusa (Mk4 or the Mini)

If you’re unsure about how much you’ll use it or if you’re on a budget get the Ender.

But if you’re confident this is something you’ll use a lot and you can afford it get the Prusa.

The Prusa has just too many nice features to ignore, their support is amazing, and their upgrade path makes it something you can (likely) keep upgrading as new features come out.

For example I have a Mk3 and I have the upgrade kit to make it a Mk3s+. And now that the Mk4 is out there’s upgrade kits to make it a 3.5, 3.9, or a 4. They’re really great about trying to keep your printer as feature rich as possible without having to buy a whole new one.

Appreciate your take on this and specifically mentioning that you have a VM for Home Assistant. That was a lightbulb moment for me as I like how easy it is to manage updates as an OS install rather than in a Docker container. If I ever get around to rebuilding my server architecture I’m definitely going to do this!

Each device has its own protocol/payload, but there is a utility called rtl_433 that can decode about 200 of them.

If you’re keen on tinkering a bit I would highly recommend going this route as it’s a lot of fun and opens the doors to do all kinds of stuff.

Start by getting an SDR. I don’t recommend the super tiny ones since they can get really hot (since it’ll be running 24/7). I have this one and recommend it as it comes with an antenna etc. Nooelec RTL-SDR v5 Bundle

While you’re waiting for that to arrive set up an MQTT broker if you haven’t got one running already (the Mosquitto add-on in HA) and install the rtl_433 add-on as well.

From there read the rtl_433 docs to set up a config file to scan for what you want. Out of interest I set mine to rotate through a bunch of common frequencies and let it go for 24h to see what it could pick up. It was quite interesting! Another good way to do this is any wireless device will have an FCC number on it. You can look that up on their website and it’ll tell you what frequency it’s using and you can have your SDR scan that. If you don’t specify any protocols the rtl_433 utility will try everything it knows how to decrypt. This can be CPU intensive especially on a Pi so once you know what protocol it is you can specify it in the config file to reduce CPU load.

Hopefully that’s enough to set you down the right path. Happy scanning!

Yup! In addition to temperature/humidity sensors, I’m also pulling in my gas meter and my home security sensors(I was using a big-name security company, but when my contract was up I kept the sensors installed and tapped into them with my SDR)

I second using an SDR with 433MHz devices. Incredibly reliable and low power.

Been using a nooelec SDR and one of these sensors:

Geevon TX10 Wireless Remote Outdoor Sensor

I’ve had good luck with this Zigbee one. It’s on the larger side, but takes AAA batteries which is nice. THIRDREALITY Zigbee Door/Window Sensor

Alternatively, if you’re keen to tinker a bit you can get an SDR and then use 433MHz sensors. (Requires using RTL_433 and MQTT).

I was able to use the existing sensors from my traditional security system this way. Nice thing is that it’s the most reliable wireless components on my system and the battery lasts forever.

I would suggest a nooelec SDR like this one: Nooelec RTL-SDR v5 Bundle

And something like this for sensors: Door Magnetic Contact Sensor

😂 Legendary status updates!

Keep us posted. We must know what happens over the next three days!