About 6-7 years ago. I had a friend who still had some files on a 5-1/4 floppy. I kept an old Win95 PC specifically with a bunch of old drive types and a DVD burner, so I could rescue old files & move them to DVD. Sadly, that PC stopped booting about 2 years ago. I did consider trying to resurrect it, but neither of my current PCs even have a built-in DVD drive, so I think it’s safe to say that moving files to DVD isn’t moving the files forward enough anymore.
I think you already have your answer, but let me elaborate a bit.
The places in the middle where the filament is missing - those places are either dirty or too high.
The area in the back where the filament is sticking, but isn’t filling the area correctly, those areas are too low.
Most likely cause for both is the build plate on an Ender just isn’t perfectly flat. You can try to adjust it to get it closer to being level. But I’ve always found I’ll have sections that just aren’t right. And so, I just don’t print on those sections. Find the areas that do print well, and locate your prints there.
Last note - try putting down a layer of painter’s tape. I find that helps tremendously with both of the points you’re fighting.
Probably doesn’t count as I didn’t buy it, so I’m technically not dealing with it. But let’s talk about electric riding lawnmowers. Last year I was looking to replace my 20+ year old riding lawnmower with an electric one. Could not find a single manufacturer who would also provide the parts lists. Digging deeper, seems like they simply do not sell parts, like at all. The mowers just aren’t repairable - straight up, if it breaks, buy a new one. That’s irresponsible when talking about an electric drill, but a full riding mower? WTF?
To be fair, this might be a chicken & egg problem. Low adoption rates means there’s a very small market for parts, so there’s no aftermarket support. And that aftermarket is where I get parts for my current mower. So maybe it’s not fair to blame the manufacturer? But I think that’s a stretch. From where I’m standing, it sure looks like intentional planned obsolescence.
For a unique answer, I’m going to say my model trains from the 1940s & 50s (Lionel, O gauge). They were designed to be taken apart & serviced, and it shows. And they have enough common parts that even though they’re now 75+ years old, you can still get parts.
I’ll also throw my 1997 Ford F-150 into the mix as a more common answer. Ford made literal millions of these, so not only are parts still available, they will be for decades still to come. Heck, I replaced the motor last year, and was able to get most of the bolt on parts I wanted straight from the dealership. Not bad for 25+ years old.
Couple years ago, I finally got off my ass & started making time to actually fix the stuff I said I would fix. It’s been transformational. This year, I made time for the ‘good’ car. I replaced the transmission along with a lot of other little bits that had been bothering me. Took close to 5 months in total, but I’m at the point now where both the good car & the beater truck are both reliable runners. It’s a good feeling.
My co-worker & I have the exact same lunchbag, except the label has a different gibberish name on it. Yup, both from Amazon.
I assume this is the same reason mouthwash is mostly alcohol.
Remember that any advice from your parents (or anyone over 30, apparently) is, at best, 20 years past its best by date. Doesn’t mean it’s not still good, but give it a sniff test.
USA, Southeast. In general, you have 1 trashcan for trash and 1 recycling bin for everything that could potentially be recycled. Sometimes it’s just one can for ‘combined recycling’ though. And if you’re in an apartment, it’s usually all just one big dumpster. A service comes around once a week to collect those.
If recycling is being done, the load gets dumped through an automatic waste separator (a building sized conveyor belt with machines that separate items by density). They find all the metal & recycle that. Particularly nice services will also grab the cardboard/paper. But none of them can really separate the different types of plastic from each other, so all of that goes to the landfill.
Interesting to me, the most poor/rural areas appear to be the best at recycling, as for them you must bring your trash to a transfer station yourself. And those stations have voluntary bins for each of the recycling waste streams. So if you care enough to separate your plastic into the different types (we number them 1 - 7), there’s a bin for that.
Same, I wonder if it’s available in the USA.
late edit In fact it is. https://www.birdshades.com/product/
Really disappointed to see both my senators (GA) on here. Thank you for putting the link in your post, I’ll write them both now.
“You know you’re old when they take your favorite item off the Taco Bell menu.”
RIP chillitos. You are missed.
I wouldn’t call model railroading my main hobby, as I only touch it once in a while. But that’s also what I do love about it. You leave it packed away in a closet for YEARS, then one rainy day you stumble across those boxes & decide to unpack them. And they still work like you remember as a kid. It’s like reconnecting with an old friend.
I get about 7. Turns out I need closer to 9. When I do get enough sleep, the difference is pretty wild - my mood is better, WAY better. And my appetite is under control too, which is a nice bonus. But the only way to actually get those 9 hours is literally “eat-sleep-work”. Just ain’t enough time in the day.
See if I can bribe enough local officials to pass an amendment making bike lanes mandatory on all new road construction projects. Sadly, even at the local level I don’t think $10,000 would be enough.
I stopped a long time ago. I just prefer interactive entertainment over passive. TV was easy to axe, cut the cable bill & never looked back. Movies went much later, too many shitty movies back to back, eventually stopped going, so stopped seeing previews, which in turn broke the cycle of wanting to see the next one.
I will say that not watching movies or TV makes it harder to interact with folks. There’s something of a shared culture we have through our entertainment, and not having that makes it harder to connect.
Oddly, I just started watching movies again this year. I’ve been getting better about getting on the elliptical, and I’m now at the point where my ‘runs’ take about 90 minutes. So been catching up on all the movies I considered watching over the last ~25 years. Turns out I didn’t miss much. lol.
So, I’m a novice Linux user and have been on Ubuntu for maybe 2 years now. And I’m just starting to hit the SNAPS wall - IE, just a bit too much of what I want doesn’t install through snaps. Is there a good progression for my “next distro after Ubuntu?”. Still need some training wheels, but ready to take the next step.
I wanted to play a Mass Effect game, but I suck at cover-shooters. So I put it on easy and ran around punching my way through the game.
$500/mo. Single person, SE USA. I eat 2 meals per day and a snack. Cook all of it except for one treat meal per week.
I should add, that price might be a tad high, as my grocery bill includes things for the household like laundry detergent.